Welcome to Education Hub

Education

Class 10 Math Unit Wise Class Test 1 | Practical Geometry of a Circle | Exercise 10.2 & Review Exercise | Model Papers 2027

Class 10 Math Chapter 10 Board Model Paper

Class 10 Mathematics Unit Wise Class Test 1 on Practical Geometry of a Circle is prepared for Punjab Board students according to the latest examination pattern. This test covers Exercise 10.2 and Review Exercise from Class 10 Mathematics and is useful for preparation of Punjab Board 2027 Model Papers, school tests, annual examinations, and board-style practice. Students can use this Class 10 Maths Unit 10 test to improve their concepts, practice important questions, and prepare effectively for the Mathematics Board Exam 2027.

786Times
786Times
786Times
786Times
786Times
786Times
786Times
786Times
Model Paper 2027
T-1
Unit 10: Practical Geometry of Circles
Time: 5 minutes
(Objective Type)
Total Marks: 5
1. Tick the correct answer.
(i) A tangent to a circle touches the circle at:
(a) Exactly one point
(b) Two distinct points
(c) Infinite many points
(d) None point
Step 1: A tangent is a line that meets the circle at one and only one point, called the point of contact.Step 2: A line meeting at two points is a secant, not a tangent.Answer: (a) Exactly one point
(ii) At point of contact, the tangent line makes an angle with radius of value:
(a) 0°
(b) 30°
(c) 45°
(d) 90°
Step 1: Theorem: a tangent is perpendicular to the radius drawn at the point of contact.Step 2: So the angle is 90°.Answer: (d) 90°
(iii) From a point outside the circle, these can be drawn ________ tangents to the circle:
(a) One
(b) Two
(c) Four
(d) Infinite many
Step 1: From an outside point, one tangent can be drawn on each side of the line joining the point to the centre.Answer: (b) Two
(iv) Two tangent lines drawn from a point outside the circle are:
(a) Parallel
(b) Perpendicular
(c) Equal in length
(d) None of these
Step 1: Let PA and PB be the tangents and O the centre. Triangles OAP and OBP are right-angled at A and B.Step 2: OA = OB (radii) and OP is common, so the triangles are congruent (RHS).Step 3: Hence PA = PB. They meet at P, so they are not parallel.Answer: (c) Equal in length
(v) A tangent line can pass through a point that lies:
(a) On the circumference
(b) Inside the circle
(c) Outside the circle
(d) Both (a) and (c)
Step 1: On the circle: exactly one tangent passes through the point.Step 2: Outside the circle: two tangents pass through the point.Step 3: Inside the circle: every line through the point cuts the circle at two points, so no tangent.Answer: (d) Both (a) and (c)
786Times
786Times
786Times
786Times
786Times
786Times
786Times
Model Paper 2027
T-1
Unit 10: Practical Geometry of Circles
Time: 35 minutes
(Subjective Type)
Total Marks: 20
2. Write short answers to the following questions:
(6 × 2 = 12)
(i) Define Tangent to a circle.
A tangent to a circle is a straight line that touches the circle at exactly one point. That point is called the point of contact.The tangent is perpendicular to the radius drawn to the point of contact.
(ii) Draw tangent to APB at point P, when P is midpoint of the arc.
Step 1: Draw chord AB.Step 2: Draw the right bisector of AB. Since P is the midpoint of the arc, it passes through P (and through the centre).Step 3: With P as centre, draw two equal arcs cutting the bisector on both sides of P at X and Y.Step 4: With X and Y as centres and a radius more than PX, draw arcs meeting at Z.Step 5: Draw line ZP and extend it both ways. It is perpendicular to the radius at P, so it is the required tangent (parallel to chord AB).
(iii) Draw tangent to PQR at point P, when P is endpoint of the arc.
Step 1: Draw chords PQ and QR.Step 2: Draw right bisectors of PQ and QR. They meet at O, the centre of the arc.Step 3: Join OP and extend it beyond P.Step 4: At P, draw the perpendicular to OP (equal arcs from P on line OP, then arcs from those two points meeting at Z).Step 5: Draw line ZP extended both ways. This is the tangent at P.
(iv) Draw tangent to ABC from a point P, when P is outside the arc.
Step 1: Find the centre O: draw chords AB and BC and their right bisectors; they meet at O.Step 2: Join OP and draw its right bisector, meeting OP at M.Step 3: With M as centre and radius MO, draw a circle through O and P. It cuts the given circle at T and T′.Step 4: Join PT and PT′. These are the tangents from P.Why: ∠OTP is an angle in a semicircle, so it is 90°, which means PT ⟂ OT.
(v) Draw a circle of radius 1.3cm and draw a tangent at point P, when P lies on its circumference.
Step 1: Draw a circle with centre O and radius 1.3 cm.Step 2: Mark a point P on the circle. Join OP and extend it beyond P.Step 3: With P as centre, cut the line OP on both sides at A and B (equal distance).Step 4: With A and B as centres and a radius more than PA, draw arcs meeting at C.Step 5: Draw line CP extended both ways. It is perpendicular to OP at P, so it is the tangent at P.
(vi) Draw a circle of radius 1.5cm and draw a tangent at point P, when P is at a distance of 8cm from its centre.
Step 1: Draw a circle with centre O and radius 1.5 cm.Step 2: Mark P such that OP = 8 cm.Step 3: Draw the right bisector of OP, meeting OP at M (OM = 4 cm).Step 4: With M as centre and radius MO = 4 cm, draw a circle. It cuts the given circle at T and T′.Step 5: Join PT and PT′. These are the two tangents.Check: PT = √(8² − 1.5²) = √61.75 ≈ 7.86 cm.
Note: Answer the following Questions.(4 + 4 = 8)
3. Draw a circle of radius 1.6cm. Draw two tangents that meet an angle of 30°.
Construction / Diagram Area O r = 1.6 cm P 30°
Key idea: in quadrilateral OAPB, ∠A = ∠B = 90° and ∠P = 30°, so ∠AOB = 360° − 90° − 90° − 30° = 150°.Step 1: Draw a circle with centre O and radius 1.6 cm.Step 2: Draw radius OA.Step 3: At O, draw radius OB so that ∠AOB = 150° (use a protractor, or 90° + 60° with a compass).Step 4: At A draw the perpendicular to OA, and at B the perpendicular to OB.Step 5: These perpendiculars (the tangents) meet at P. Then ∠APB = 30°.Check: OP = r ÷ sin 15° ≈ 1.6 ÷ 0.2588 ≈ 6.18 cm, and PA = PB = r·tan 75° ≈ 5.97 cm.
4. From a pulley point, construct two tangents to a machine wheel having r = 2.1cm, such that the angle between them is 30°.
O r = 2.1 cm P 30°
Key idea: the angle between the tangents is 30°, so the angle between the two radii to the points of contact is 180° − 30° = 150°.Step 1: Draw the wheel: circle with centre O and radius 2.1 cm.Step 2: Draw radius OA.Step 3: At O, draw radius OB with ∠AOB = 150°.Step 4: At A and B, draw perpendiculars to OA and OB (the tangents).Step 5: They meet at the pulley point P. PA and PB are the required tangents, with ∠APB = 30°.Check: OP = 2.1 ÷ sin 15° ≈ 8.11 cm, and each tangent PA = PB = 2.1 × tan 75° ≈ 7.84 cm.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button