Class 12 Physics ALP Solved Model Paper 2026-27 PDF Download
2nd Year Physics Solved Model Paper 2026-27 – PECTAA Smart Syllabus

Class 12 Physics ALP Solved Model Paper 2026-27
2nd Year Physics | Punjab Boards | Annual Examination 2027
Prepared According to the Latest PECTAA Smart Syllabus
📘 Prepare for 2nd Year Physics Annual Examination 2027
Students preparing for the Class 12 Physics Annual Examination 2027 can use this Physics ALP Solved Model Paper 2026-27 as a helpful examination preparation resource. It is based on the latest Smart Syllabus and Accelerated Learning Program (ALP) issued by the Punjab Education, Curriculum, Training and Assessment Authority (PECTAA), Lahore.
This 2nd Year Physics Solved Model Paper provides objective and subjective questions with answers and explanations. It is designed to help students understand the model paper format, practise numerical problems, revise important concepts and prepare for the upcoming Punjab Boards examination.
📌 Class 12 Physics ALP Model Paper – Key Information
🏛️ PECTAA Smart Syllabus 2026-27 for Class 12 Physics
The Punjab Education, Curriculum, Training and Assessment Authority (PECTAA) has issued the revised Grade 12 Smart Syllabus under the Accelerated Learning Programme for the academic session 2026-27.
The revised syllabus and examination resources are intended to guide students and teachers in preparing for the Punjab Boards Annual Examination 2027. Students should follow the officially prescribed topics and carefully check the deleted content and excluded exercise questions before starting their final preparation.
⭐ Important for All Punjab Board Students
This solved model paper is a useful resource for students studying under the Punjab Boards. Use it alongside the prescribed Physics textbook and official ALP Smart Syllabus.
📖 What Is Included in the 2nd Year Physics Solved Model Paper?
The Class 12 Physics Model Paper 2026-27 provides practice material for the objective and subjective portions of the examination.
🔵 1. Physics MCQs – Objective Section
The objective section contains 17 multiple-choice questions carrying 17 marks. Each question has four options. The solved material helps students identify the correct answers and understand the relevant concepts.
🟢 2. Short Questions with Answers
Practise important short questions from the prescribed Physics chapters. Clear explanations and relevant scientific concepts help students understand how to write accurate and meaningful answers.
🟠 3. Numerical Problems with Complete Solutions
Numerical questions are an important part of Physics preparation. Step-by-step solutions explain the given data, required formulas, calculations and final answers to make problem-solving easier.
🟣 4. Long Questions and Detailed Answers
Prepare descriptive questions, mathematical derivations and conceptual explanations through organised solutions that help students understand the subject and improve answer presentation.
📚 Important Topics of Class 12 Physics
Students should revise all relevant topics included in the official PECTAA Class 12 Physics ALP Smart Syllabus 2026-27. Important areas of study include:
- ⚡ Electrostatics
- 🔌 Current Electricity
- 🧲 Electromagnetism
- 〰️ Alternating Current
- 🌊 Physics of Solids
- 🔭 Physical Optics
- 💡 Optical Instruments
- ⚛️ Modern Physics
- ☢️ Atomic and Nuclear Physics
- 🌌 Particle Physics and Cosmology
The topics listed above are general subject areas. Their inclusion in the examination preparation must be checked against the official 2026-27 ALP Smart Syllabus and applicable deleted-topic instructions.
🌟 Benefits of Practising the Physics ALP Solved Model Paper
How This Model Paper Helps Students
- Understand the Punjab Board examination format.
- Practise objective-type Physics MCQs.
- Improve short-question answering skills.
- Learn numerical problems with working steps.
- Revise important formulas and scientific concepts.
- Improve conceptual understanding of Physics.
- Prepare according to the latest PECTAA Smart Syllabus.
- Build confidence before the Annual Examination 2027.
👨🏫 Useful Study Material for Physics Teachers and Colleges
This 2nd Year Physics Solved Model Paper 2026-27 is also a useful supplementary resource for Physics teachers, lecturers and educational institutions. Teachers can use the objective questions, short questions, numerical problems and descriptive answers for classroom discussions, revision sessions and practice tests.
Students can first attempt the questions independently and then compare their answers with the provided solutions. This method encourages independent learning and helps students identify concepts that need additional attention.
🎯 How to Prepare for the Physics Board Examination 2027?
📥 Related Resource – Class 12 Physics Smart Syllabus 2026-27
Physics ALP Smart Syllabus PDF
Students should also consult the latest Physics Smart Syllabus to understand the revised course content, deleted topics and excluded exercise questions for the 2nd Year Annual Examination 2027.
📢 Official PECTAA Notification – 14 November 2026
The Grade 12 ALP Smart Syllabus, Pairing Schemes and Model Papers were notified by PECTAA through Notification No. PECTAA/C&C Unit/2026/1258, dated 14 November 2026, for the academic session 2026-27 and BISE Annual Examination 2027.
📄 Official Notification PDF
Consult the official notification for the relevant Grade 12 ALP syllabus and examination information.
➜ Open Official PECTAA Notification💡 Final Message for 2nd Year Students
Dear students, make the best use of this Class 12 Physics ALP Solved Model Paper 2026-27 during your examination preparation. Understand the concepts, practise numerical problems, revise formulas and carefully study the prescribed textbook content.
Remember that a model paper is a preparation resource, not a guarantee of questions in the final examination. Complete syllabus preparation and regular practice remain essential.
Class 12 Physics ALP Solved Model Paper 2026-27 – Free PDF Download
Students preparing for the Class 12 Physics Annual Examination 2027 can now strengthen their exam preparation with the Physics ALP Solved Model Paper 2026-27, specially prepared according to the latest Smart Syllabus and Accelerated Learning Program (ALP) issued by the Punjab Education, Curriculum, Training and Assessment Authority (PECTAA), Punjab. This 2nd Year Physics Model Paper provides students with a useful opportunity to understand the updated examination pattern, important questions, and syllabus requirements for the upcoming Punjab Board Annual Examination 2027.
Download 2nd Year Physics ALP Solved Model Paper
The Class 12 Physics Solved Model Paper PDF is available for free download to help students prepare effectively according to the new PECTAA ALP Smart Syllabus 2026-27. Students and teachers can use this solved model paper for revision, self-assessment, classroom practice, and understanding the expected board examination format. Download the free PDF and make your preparation more focused for the 2nd Year Physics Annual Examination 2027.
📚 ماڈل پیپر کی تیاری اور اہمیت
یہ ماڈل پیپر بورڈ کی جانب سے 14 نومبر 2026ء کو جاری کردہ سمارٹ سلیبس (Smart Syllabus) سے متعلق نوٹیفکیشن سے لیا گیا ہے۔ اور ماڈل پیپر حکومت پنجاب کی طرف سے سمارٹ سلیبس کے نوٹیفکیشن میں جاری ہوا، جبکہ اس کے تمام سوالات کے تفصیلی اور مستند حل PECTAA کی جانب سے شائع کردہ درسی کتاب سے حاصل کیے گئے ہیں۔
طلبہ کے لیے یہ ماڈل پیپر سالانہ امتحان 2027ء کی تیاری میں خصوصی اہمیت رکھتا ہے۔ اس میں دیے گئے سوالات اور ان کے حل کو اچھی طرح سمجھیں، بار بار دہرائیں اور اپنی امتحانی تیاری کو مؤثر بنائیں۔
اس ماڈل پیپر کو اپنی امتحانی تیاری کا اہم حصہ بنائیں، تاہم بہترین نتائج کے لیے مکمل سمارٹ سلیبس اور درسی کتاب کا مطالعہ بھی ضرور کریں۔
بہترین تیاری، شاندار کامیابی کی ضمانت!
MODEL PAPER OF PHYSICS GRADE-12
Objective Type Questions
Question 1: Four possible answers A, B, C & D to each question are given. The choice which you think is correct, fill the circle in front of the question (on bubble sheet) with Marker or Pen ink. Cutting or filling two or more circles will result in zero mark in that question. (1 × 17 = 17)
Step 1: Vrms = √(3RT/M) ∝ √(T/M).
Step 2: T′ = T/2, M′ = 2M → T′/M′ = (T/M)/4.
Step 3: V′ = V × √(1/4) = 300 × ½ = 150 m s-1.
Step 1: T1 = 27 + 273 = 300 K, T2 = 327 + 273 = 600 K.
Step 2: v ∝ √T → v2/v1 = √(600/300) = √2.
Step 3: v2 = √2 v.
Step 1: v = ω√(x0² − x²).
Step 2: At extreme position x = ±x0 → v = 0. (Acceleration a = −ω²x is maximum there; displacement is maximum; ω is constant.)
Step 1: Inside Earth, gravitational force on the stone ∝ its distance r from the centre: F = −(GMm/R³) r.
Step 2: Force ∝ displacement and directed toward the centre → S.H.M. with T = 2π√(R/g) ≈ 84 min.
Step 1: Stable interference needs sources with constant phase difference (coherent).
Step 2: Two independent lamps emit waves with random, rapidly changing phases → no fixed fringes.
Light reflected from the front and back surfaces of the thin soap film interferes; different thickness removes different wavelengths, producing colours.
Energy U = ½CV² is stored in the electric field; energy density u = ½ε0E².
Step 1: Isolated → charge Q constant.
Step 2: Dielectric raises capacitance C′ = kC.
Step 3: V′ = Q/C′ = V/k → decreases.
Pav = Vrms Irms cos φ with φ = 90° → cos 90° = 0 → Pav = 0.
u = B²/(2μ0) → B′ = 2B gives u′ = (2B)²/(2μ0) = 4u.
More intensity = more photons per second = more photoelectrons per second. Stopping potential depends on frequency; work function and threshold frequency depend on the metal.
λ = h/p = h/mv. A particle at rest has p = 0 (no wave); charge is not required.
Fragments collide with surrounding atoms (moderator/coolant), sharing their kinetic energy as thermal energy.
N/N0 = (½)n = (½)4 = 1/16.
A fast electron knocks out an inner-shell (K) electron; an outer electron falls into the vacancy and emits an X-ray photon of fixed energy.
X-ray attenuation I = I0e−μx depends on tissue density (and atomic number) and thickness, so bone and soft tissue absorb differently.
Known luminosity L and measured flux F give distance d = √(L/4πF).
Subjective Type Questions
1. Average translational K.E. per molecule = ½m⟨v²⟩ = (3/2)kT.
2. It contains only T and k (constant), not the mass or type of gas.
3. Hence yes: all (ideal) gases have the same average translational K.E. at the same temperature; lighter molecules just move faster.
1. K.E. = (3/2)kT. At T → 0 K, K.E. → 0.
2. Molecular motion (translational) practically ceases. (Quantum mechanically only a tiny zero-point energy remains.)
1. P = ⅓ ρ v²rms.
2. ρ′ = 2ρ, vrms same → P′ = ⅓(2ρ)v² = 2P.
3. Pressure becomes double.
1. For a fixed amount of gas, PV = nRT, so T = PV/nR.
2. If P and V are constant, then T is fixed. So T cannot rise unless P or V (or n) changes.
S.H.M. is the periodic motion in which acceleration is directly proportional to displacement and always directed toward the mean position: a = −ω²x.
Equation: x = x0 sin(ωt + φ) (or x = x0 sin ωt when φ = 0), where ω = 2πf.
1. Shock absorbers (oil-filled dampers) provide a damping force that opposes the spring’s motion.
2. They dissipate oscillation energy as heat, so the body quickly settles instead of bouncing; this gives comfort and control.
1. T = 2π√(L/g).
2. g decreases with height (Murree, and still more on Everest) → T increases.
3. The pendulum would run slow, so it will not be accurate there.
Critical damping is most suitable: the body returns to equilibrium in the shortest time without oscillating. Under-damping keeps oscillating; over-damping returns too slowly.
Every point on a wavefront acts as a source of secondary spherical wavelets spreading with the speed of the wave. The new wavefront after time t is the common tangent (envelope) to these wavelets.
1. Rays reflected from two adjacent atomic planes (spacing d, glancing angle θ) differ in path by 2d sin θ.
2. Constructive interference occurs when this path difference is a whole number of wavelengths: 2d sin θ = nλ (n = 1, 2, 3 …).
1. Δy = λL/d.
2. In water λ′ = λ/n (n = 1.33), frequency unchanged.
3. Δy′ = Δy/1.33 → fringe spacing decreases (fringes come closer).
Similarities: both need two coherent sources (or slits) and produce alternate maxima and minima; maxima when path difference = nλ, minima when = (n+½)λ; spacing Δy = λL/d.
Differences: light – transverse EM waves, λ ≈ 10-7 m, slit separation ≈ 10-4 m, pattern seen on a screen. Sound – longitudinal waves, λ ≈ cm–m, two loudspeakers driven by one oscillator, detected with a microphone.
E = −ΔV/Δr depends on the rate of change of V, not on its value. So E may or may not be zero. Example: at the mid-point of an electric dipole V = 0 but E ≠ 0.
Unit of energy. 1 eV = energy gained by an electron moving through 1 V: 1 eV = (1.6 × 10-19 C)(1 V) = 1.6 × 10-19 J.
1. Dielectric molecules polarise; induced charges produce a field opposing the original field.
2. Net field and potential difference fall for the same charge Q.
3. C = Q/V therefore rises: C′ = kC (k > 1).
E = −ΔV/Δr. The negative sign shows that the electric field points in the direction in which the potential decreases (from high to low potential).
A choke offers reactance XL = 2πfL which limits current, but average power in a pure inductor is zero (φ = 90°), so no heat is wasted. A resistor limits current by dissipating I²R as heat.
XC = 1/(2πfC) → decreases as f increases (infinite for DC).
XL = 2πfL → increases as f increases (zero for DC).
Current leads the voltage by 90° (π/2): when V = V0 sin ωt, I = I0 sin(ωt + 90°).
Yes. Mutual inductance exists between any two coils when flux of one links the other. With four coils, a changing current in one induces emf in each of the others (M12, M13, M14 …), e.g. coil 1 as primary and coils 2, 3, 4 as secondaries, or two primaries and two secondaries.
E = hf, where h = 6.63 × 10-34 J s.
Photon energy is directly proportional to frequency: higher f (e.g. violet, UV) means more energy per photon.
Yes. φ = hf0, i.e. the work function is directly proportional to the threshold frequency f0; photons with f < f0 cannot eject electrons.
The first metal has a lower work function (threshold frequency f0 less than f). For the second metal f < f0, so photon energy hf < φ and no emission occurs.
For f > f0, photoelectric current is directly proportional to intensity (more photons → more emitted electrons per second); the maximum K.E. of electrons stays the same.
The time in which half of the radioactive nuclei in a sample decay: T½ = 0.693/λ.
Fraction = (½)4 = 1/16 = 0.0625 → 6.25 % remains.
1. Very high temperature (≈ 108 K) is required to overcome Coulomb repulsion between nuclei.
2. High particle density and long confinement time are needed; the hot plasma must be held away from walls (magnetic/inertial confinement).
Kα: emitted when an electron falls from the L shell (n = 2) into a K-shell vacancy.
Kβ: emitted when an electron falls from the M shell (n = 3) into the K shell; it has higher energy than Kα.
Air and tissue have very different acoustic impedances, so almost all of the ultrasound is reflected at the boundary and very little enters the organ. Air also scatters/absorbs strongly, so no useful echoes return from deeper parts.
Part of the wave is reflected (echo) and part is transmitted. The reflected fraction depends on the difference in acoustic impedance; these echoes are detected to form the image.
A standard candle is an object of known luminosity L (e.g. Type Ia supernova, Cepheid variable). Measure its flux F, then d = √(L/4πF) gives the distance of its host galaxy.
Hubble’s law: v = H0d – recession speed of a galaxy is proportional to its distance.
It shows the universe is expanding; running the expansion backward, all matter was once at one point, supporting the Big Bang (age ≈ 1/H0).
There would be no cosmic redshift: spectral lines of distant galaxies would appear at their normal laboratory wavelengths (no shift toward the red end), same as for nearby sources.
Step 1 – Kinetic theory pressure for N molecules of mass m in volume V:
Step 2 – Ideal gas equation with Boltzmann’s constant k:
Step 3 – Equate (1) and (2): ⅓ N m⟨v²⟩ = N k T → m⟨v²⟩ = 3kT.
Step 4 – Multiply by ½:
Step 5 – Hence average translational K.E. ∝ T only: temperature is a direct measure of molecular K.E. (For one mole: K.E. = (3/2)RT.)
Compare with x = x0 sin(ωt + φ): amplitude x0 = 0.05 m, ω = 4 rad s-1.
Velocity at x = 0.03 m: v = ω√(x0² − x²) = 4√(0.05² − 0.03²) = 4√(0.0025 − 0.0009) = 4√0.0016 = 4 × 0.04 = 0.16 m s-1.
Maximum velocity: vmax = ωx0 = 4 × 0.05 = 0.20 m s-1.
Step 1 – While charging, potential difference V = Q/C rises linearly with charge Q (straight line through origin).
Step 2 – Work to add a small charge ΔQ at potential V is ΔW = VΔQ = area of a thin strip. Total work = total area under the graph (a triangle).
Step 3 – Area = ½ × base × height = ½ Q V.
This work is stored as electric potential energy in the field between the plates.
Given: λ = 450 × 10-9 m, L = 1.80 m, Δy = 3.90 × 10-3 m.
Fringe spacing (dark to dark) Δy = λL/d → d = λL/Δy.
d = (450 × 10-9 × 1.80) / (3.90 × 10-3) = (8.1 × 10-7)/(3.9 × 10-3)
d ≈ 2.08 × 10-4 m (≈ 0.208 mm)
Behaviour: the capacitor charges and discharges every half-cycle; charge flows back and forth so AC “passes”, DC is blocked. It stores energy in one quarter-cycle and returns it in the next, so average power = 0.
Step 1 – Applied voltage: V = V0 sin ωt.
Step 2 – Charge: q = CV = CV0 sin ωt.
Step 3 – Current: I = dq/dt = ωCV0 cos ωt = ωCV0 sin(ωt + 90°).
Step 4 – Peak current I0 = ωCV0 → V0/I0 = 1/ωC. This opposition is capacitive reactance:
Step 5 – Comparing V = V0 sin ωt with I = I0 sin(ωt + 90°): current reaches its maximum a quarter-cycle (90° = π/2) before the voltage → current leads voltage by 90°.
Compare with I = I0 sin ωt: I0 = 420 A, ω = 100π rad s-1.
Irms = I0/√2 = 420/1.414 = 297 A (≈ 2.97 × 102 A).
f = ω/2π = 100π/2π = 50 Hz.
Photoelectric effect: emission of electrons from a metal surface when light (or radiation) of suitable frequency falls on it.
Step 1 – Einstein: light consists of photons, each of energy E = hf.
Step 2 – One photon gives all its energy to one electron. Part (φ, the work function) frees the electron; the rest becomes its K.E.:
Step 3 – Explanation of facts: (i) if hf < φ, i.e. f < f0 = φ/h, no emission (threshold frequency); (ii) K.E.max grows with f, independent of intensity; (iii) emission is instantaneous (one photon–one electron); (iv) greater intensity = more photons = more photoelectrons, so photocurrent ∝ intensity.
Given: m = 5.1 μg = 5.1 × 10-6 g, A = 5.9 × 105 Bq, molar mass = 241 g mol-1, NA = 6.02 × 1023.
(i) N = (m/M)NA = (5.1 × 10-6/241)(6.02 × 1023) = 2.12 × 10-8 × 6.02 × 1023 ≈ 1.27 × 1016 nuclei.
(ii) A = λN → λ = A/N = 5.9 × 105/1.27 × 1016 ≈ 4.6 × 10-11 s-1.
(iii) T½ = 0.693/λ = 0.693/4.63 × 10-11 ≈ 1.5 × 1010 s. In years: 1.5 × 1010/(3.16 × 107) ≈ 4.7 × 102 years (≈ 474 y with the given data).
Step 1 – A piezoelectric transducer, coupled to the skin with gel (to remove air), emits short pulses of ultrasound (about 1–15 MHz).
Step 2 – Pulses travel into the body; at each boundary between tissues of different acoustic impedance part of the wave is reflected as an echo and the rest continues.
Step 3 – The same transducer receives the echoes. Time delay t gives depth: d = vt/2 (v ≈ 1540 m s-1 in soft tissue).
Step 4 – Echo strength sets the brightness of the dot (bigger impedance difference = brighter).
Step 5 – Scanning the beam across the body, a computer assembles all dots into a 2-D real-time image (B-mode).
Given: L = 1.0 × 1036 W, F = 2.0 × 10-12 W m-2.
F = L/(4πd²) → d = √(L/4πF).
d = √[1.0 × 1036 / (4 × 3.14 × 2.0 × 10-12)] = √(1.0 × 1036/2.51 × 10-11) = √(3.98 × 1046)
d ≈ 2.0 × 1023 m (≈ 2.1 × 107 light-years).
