Class 10 Fashion Designing ALP Solved Practical Papers 2027 PDF Download
PECTAA Smart Syllabus 2026-27 | Punjab Board Practical Exam Preparation

Class 10 Fashion Designing ALP Solved Practical Papers 2027 – Free PDF Download
Students preparing for the Class 10 Fashion Designing Practical Examination 2027 can now access solved model practical papers according to the latest PECTAA Smart Syllabus 2026-27. These 10th Class Fashion Designing ALP Solved Practical Papers are designed to support students in understanding important practical activities, examination requirements, and the expected paper pattern for the Punjab Board Annual Examination 2027.
The practical papers are based on the Accelerated Learning Program (ALP) and the new Smart Syllabus issued by PECTAA Punjab. Students and teachers can use this preparation material for revision, classroom practice, and practical examination preparation. The solved model papers provide useful guidance for understanding practical questions and improving subject knowledge.
📥 Free PDF Download – Fashion Designing Practical Papers 2027
Download the Class 10 Fashion Designing ALP Solved Model Practical Papers 2027 in PDF format and use them for effective exam preparation.
FREE Study Material for Punjab Board Students and Teachers
Class 10 Fashion Designing Smart Syllabus 2026-27 – PECTAA Punjab
The latest Class 10 Smart Syllabus 2026-27 has been introduced under the Accelerated Learning Program (ALP) by PECTAA Punjab. Students should prepare their Fashion Designing practical work according to the prescribed syllabus and relevant examination guidelines. These solved practical model papers are intended to help students focus on the subject content included in the updated syllabus.
Why Use Solved Fashion Designing Practical Papers?
- Practice important Fashion Designing practical questions.
- Understand the practical examination format.
- Revise key concepts included in the ALP Smart Syllabus.
- Improve practical subject knowledge through solved examples.
- Support classroom preparation and individual revision.
- Prepare for the Punjab Board Annual Examination 2027.
Useful Study Material for Students and Teachers
These Class 10 Fashion Designing Solved Practical Papers can be useful for both students and teachers. Students can use the papers for self-study and revision, while teachers can use them as supplementary classroom practice material. Practising model questions can help learners become familiar with practical tasks and organise their preparation more effectively.
⚠️ Important Preparation Note
Students are advised to consult the official PECTAA Smart Syllabus 2026-27 and their prescribed textbook while preparing for the practical examination. These model papers are intended as additional preparation material and should be used alongside the official syllabus and instructions.
Prepare for Fashion Designing Practical Exam 2027
Get ready for your upcoming examination with Class 10 Fashion Designing ALP Solved Practical Papers based on the PECTAA Smart Syllabus 2026-27.
Visit www.786Times.com
Your Educational Resource for Punjab Board Updates, Model Papers and Study Material
Prepare for the Class 10 Fashion Designing Practical Examination 2027 with our solved model practical papers, specially prepared according to the latest PECTAA Smart Syllabus 2026-27 and Accelerated Learning Program (ALP) issued by PECTAA Punjab. These Class 10 Fashion Designing ALP Solved Practical Papers are designed to help students understand the practical examination pattern, important activities, and essential concepts for the upcoming Punjab Board Annual Examination 2027.
Students can download Class 10 Fashion Designing Solved Model Practical Papers 2027 in PDF format for FREE from 786Times.com. These solved practical papers provide valuable preparation material for students and teachers, helping them review important practical questions and prepare according to the new Smart Syllabus issued by PECTAA Lahore. Use these model papers for effective revision and better preparation for the Class 10 Fashion Designing Practical Exam 2027.
📚 ماڈل پیپر کی تیاری اور اہمیت
یہ ماڈل پیپر بورڈ کی جانب سے 14 نومبر 2026ء کو جاری کردہ سمارٹ سلیبس (Smart Syllabus) سے متعلق نوٹیفکیشن سے لیا گیا ہے۔ اور ماڈل پیپر حکومت پنجاب کی طرف سے سمارٹ سلیبس کے نوٹیفکیشن میں جاری ہوا، جبکہ اس کے تمام سوالات کے تفصیلی اور مستند حل PECTAA کی جانب سے شائع کردہ درسی کتاب سے حاصل کیے گئے ہیں۔
طلبہ کے لیے یہ ماڈل پیپر سالانہ امتحان 2027ء کی تیاری میں خصوصی اہمیت رکھتا ہے۔ اس میں دیے گئے سوالات اور ان کے حل کو اچھی طرح سمجھیں، بار بار دہرائیں اور اپنی امتحانی تیاری کو مؤثر بنائیں۔
اس ماڈل پیپر کو اپنی امتحانی تیاری کا اہم حصہ بنائیں، تاہم بہترین نتائج کے لیے مکمل سمارٹ سلیبس اور درسی کتاب کا مطالعہ بھی ضرور کریں۔
بہترین تیاری، شاندار کامیابی کی ضمانت!
Practical Model Paper for Fashion Designing Class-10
Solution – Q1 (Option A): Plain Weave Sample
Materials
- Cardboard (or wooden frame) 8 × 8 in, ruler, pencil, scissors
- Fabric strips, thread, wool, ribbons, tape, blunt needle
Procedure (step by step)
- Prepare the frame: cut cardboard to 8 × 8 in. Mark 1 cm spacing along the top and bottom edges.
- Make notches: cut a small slit (about 0.5 cm deep) at every mark on the top and bottom edges.
- Set the warp (tana): tie the yarn at the first top notch, pass it down to the matching bottom notch, wrap it around the back, and return up to the next top notch. Keep it evenly tight. Continue across and secure the end with tape.
- Prepare the weft (bana): cut strips/wool/ribbon about 10 in long. Tie a blunt needle or tape one end to ease passing.
- Weave row 1: pass the weft OVER the 1st warp, UNDER the 2nd, OVER the 3rd, and so on to the end.
- Weave row 2: start from the opposite side and alternate: UNDER the 1st warp, OVER the 2nd, and so on. This reverses row 1.
- Beat down: push each row up with a fork or finger so rows sit snugly, leaving the edges straight and not pulled in.
- Repeat rows 1 and 2, changing between wool, ribbon and fabric strips to show texture and colour.
- Finish: leave 1 cm tails, tie off or glue at the back, and take the sample off the frame.
Observation & Result
The interlacing of warp and weft in an over-one/under-one pattern produced a plain (tabby) weave sample of 8 × 8 in. It is firm, balanced and the same on both sides. (Note any irregular tension or gaps you observed.)
Solution – Q1 (Option B): Tie-and-Dye Sample (Bandhani or Lehrya)
Materials
- 8 × 8 in cotton or silk piece (pre-washed), thread/rubber bands, pins, dye, bucket/pot, salt (for cotton), gloves, hot-water access
A. Bandhani (dots) – procedure
- Wash the fabric to remove starch and dry it. Press flat.
- Mark dot positions lightly with chalk in a regular grid.
- Pinch the fabric at each dot into a small peak (cone) with the nails.
- Wrap strong thread tightly 3–4 times around the base of the peak and knot. Repeat for all dots.
- Prepare the dye bath as per the dye packet; add salt for cotton. Wear gloves.
- Wet the tied fabric, dip it in the dye bath for 15–20 minutes, stirring gently.
- Rinse in cold water until the water runs clear, then dry partly.
- Untie the knots carefully. Dry and press. Undyed dots form the Bandhani pattern.
B. Lehrya (diagonal waves) – procedure
- Wash and dry the fabric, lay it flat.
- Roll it diagonally from one corner into a tight, long roll.
- Fold the roll in a loose coil and bind with thread at about 1–2 cm intervals.
- Dye as above (first colour), rinse, and re-tie at new spots for a second colour if desired.
- Open and dry. Diagonal wavy stripes appear.
Observation & Result
Tied areas resisted the dye and stayed light, while exposed areas took the colour. A traditional tie-and-dye pattern was obtained on the 8 × 8 in sample.
Solution – Q2 (Option A): Dartless Bodice Block
The paper does not list the exact measurements for “standard size small”. The figures below are sample values for a typical small size, so replace them with your school’s size chart.
| Measurement | Sample (inches) |
|---|---|
| Bust | 34 |
| Waist | 27 |
| Nape to waist length | 15.5 |
| Armhole depth | 7.5 |
| Shoulder length | 4.5 |
Procedure (step by step)
- Fold the A4 pattern paper (or use a larger sheet and trim) and draw a vertical line AB = nape-to-waist length (15.5 in). A is the neck, B is the waist.
- Draw a horizontal line from A of width = bust ÷ 4 + 1 in ease = 9.5 in. Complete the rectangle.
- Mark armhole line: from A measure down 7.5 in and draw a horizontal line (chest line).
- Neck: from A mark across 2.5 in (neck width) and down 0.75 in for the back neck; for the front neck mark 2.5 in across and 2.5 in down. Join with a smooth curve.
- Shoulder: from the neck point measure 4.5 in along a slope drawn 1.5 in below the top line for the back (2 in for the front).
- Armhole curve: join the shoulder end to the side seam at the chest line with a smooth curve (deeper for the front).
- Side seam and waist: drop a vertical line from the chest line to B. Waist width = waist ÷ 4 + 1 in ease = 7.75 in, then shape the side to match.
- Trace the draft twice. Cut one piece on the fold line as the Front and the other as the Back, with the front neck deeper.
- Allowances: add 1 cm (3/8 in) seam allowance at shoulder, neck, armhole and side seams, and 2.5 cm (1 in) hem allowance at the waist/hem.
- Label each piece: name (Front/Back), size (Small), grainline arrow, centre front/back (CF/CB), “Cut 1 on fold”.
Result
Front and back dartless bodice pieces were drafted, cut, labelled, and given seam (1 cm) and hem (2.5 cm) allowances.
Solution – Q2 (Option B): Three Pairs of Hooks and Eyes
Materials
- A4-size fabric piece, 3 hooks, 3 eyes, needle, matching thread, thimble, pins, chalk, scissors, ruler
Procedure (step by step)
- Fold 1 cm hem along both short edges of the A4 fabric and press. These are the two edges that will meet.
- Overlap the edges 1 cm to represent the closure. Mark three positions 6 cm apart (e.g. 5 cm, 11 cm, 17 cm from the top) with chalk on both sides.
- Thread the needle with a double thread and knot the end.
- Attach the hooks on the underlap edge (inside of the fabric). Place the hook 2 mm from the edge, with its bill pointing towards the edge.
- Sew through each ring hole with 5–6 buttonhole or overcast stitches. Slide the needle under the hook to the bill end and sew 2 stitches over the bill to secure it.
- Attach the eyes on the top edge opposite each hook. Place the eye so its loop extends just beyond the edge, and stitch both ring holes the same way.
- Repeat for all three pairs, keeping the same distance from the edge and the same spacing.
- Fasten each hook into its eye. Check that all three pairs are in line, the edges meet neatly, and the fastenings are secure, then tug lightly to test.
- Finish the thread with 2–3 back stitches and cut it off.
Result
Three pairs of hooks and eyes were hand-stitched at equal spacing; all pairs align and fasten securely.
How to score full marks (6)
- Keep the notebook neat, signed by the teacher and prepared by yourself.
- Write title, aim, materials, procedure, observation and result for each practical.
- Attach fabric samples (plain weave, tie-and-dye, hooks and eyes) and pattern pieces with labels.
- Add neat diagrams with captions and a contents page with dates.
Likely viva questions with short answers
- What are warp and weft? Warp (tana) runs lengthwise and weft (bana) crosses it.
- What is Bandhani? A resist-dye technique where fabric is tied in small points before dyeing.
- What is a bodice block? A basic fitted pattern of the upper body, used to develop other designs.
- Why add seam allowance? To allow pieces to be stitched together.
- Where is the hook placed? On the underlap edge, with the eye on the overlapping edge.
